Filter By:
Seatposts

$18.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

$24.99 - $29.99
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- 0mm offset

$27.29
The Pure Cycles seatpost is a no frills no nonsense seatpost perfect for a basic replacement.

$29.99 - $34.99
- RaceFace Ride XC Seatposts made of forged AL-6061
- Forged, anodized and shot peened AL-6061 mast
- 2-bolt head holds saddle securely while retaining easy adjustability
- Weight: 295 g

$50.00
The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it.
- 6061 Aluminum shaft
- Two-bolt head

$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts.
- Material: 6061 aluminum
- 2-bolt adjustability
- Minimum insertion length: 90mm

$89.99
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio
- Race Face's triple butting design maintains strength in critical areas while reducing overall weight
- The tube is anodized & shot peened for increased fatigue life
- Updated Hunter head design for easy saddle installation and full adjustability
- 3D forged from 2014 heat treated aluminum with triple butted mast
- Thumbscrew tightening system allows quick dial-in of the saddle angle by hand
- Angled clamp bolts allow easy tool access for hassle free adjustment
- Rubber grommet seals the post to prevent water from entering seat tube
- Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)

$104.00
The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most.
- Carbon shaft
- Bonded Aluminum two-bolt head

$149.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post
- Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head
- Angled clamp bolts allow easy tool access for hassle free adjustment and tightening
- The rubber seatpost grommet fully seals the post to prevent water entering your seat tube
- Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon
- Wide lower cradle gives extra rail support for lightweight saddle rails
- Narrow upper cradle increases the amount of forward/back saddle adjustment
- Tilt Adjustment 6° up 12° down with Zero offset

$172.00
The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types.
- Distinctive Zipp cosmetics
- Unidirectional Carbon fiber tuned for ride comfort
- Lightweight clamping system
- Lifetime warranty

$186.99
$250.00
25% Off
This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options—0mm and 20mm.
- Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.
- FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7.
- Setback: 0/20mm.
- Sleek Di2 integration hides the Di2 junction box inside.

$190.00
Finding your rhythm can make or break your race. Our Control SL seat post puts you in an ideal position for high-output efforts and is easily adjusted thanks to the 2-bolt system letting you easily make micro-alignments for that dialed attack position—all while remaining feather light at 180g for XC riding and racing.
Its 30.9mm post diameter and 415mm length make the Control SL seat post a perfect match for the modern XC bike. Once your riding position is set, you’re focus is dialed on ride fast and efficiently —not your seat post.
- Material: High-modulus carbon fiber
- Length: 415mm
- Offset: 0mm
- Post Diameter: 30.9mm
- Seat Clamp: 2-bolt Micro Adjust with 46mm saddle rail cradle, Compatible with carbon and alloy saddle rails
- Bolts: Titanium
- Weight: 180g
- System Weight Limit: 275lbs / 125kg

$199.50 - $229.99
The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm.
We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower.
Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length.
The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp.
FEATURES
- Travel adjust shims allow you to custom tune your post to dial in your perfect length.
- Cable actuated for easy installation and a simple no bleed remote
- Ergonomic remote paddle position
- Reliable sealed cartridge internals
- User replaceable cartridge only $60 USD
- Easy to service at home
- 2 year warranty
UPDATES
- Shortest total length of any dropper
- Shortest stack height of any dropper
- New upper DU Bushing in the upper collar
- Increased bushing overlap and durability
- 100-210mm post lengths in 10mm increments.
- 20g lighter
SPECS
- Drop 120mm, 150mm, 180mm, 210mm adjustable*.
- Diameter 30.9, 31.6, 34.9
- Routing Internal only
Remote Compatibility:
- SRAM Matchmaker X - SRAM MMX clamps
- Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100
- Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only
- 22.2mm Bar Clamp - All other groups 10 speed SHIMANO
- Cable clamping remote only (post requires cable stop to be assembled at base of post)
- Travel Reducing Shim Reduces travel by up to 20mm.
Weight Post Only
- (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g
- (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g
- (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g
Remote Only
- Remote with 22.2mm Bar Clamp - 46g
- Remote with SRAM Matchmaker X / I-spec-EV - 43g
- Remote with Shimano I-spec-EV - 43g
- Remote with Shimano I-spec II - 41g
- Housing and Cable (1300mm installed length) - 50g

$199.99
The latest generation Thudbuster ST is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, and additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design.
By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made.
- Travel: 50mm
- Weight: 580g
- Max Rider Weight: 330lbs

$205.99
$275.00
25% Off
Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Seatpost the lightest post we've ever seen that passes our standards. At 136 grams (27.2mm x 300mm), it's about as light as you'll find. Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist 2-bolt micro-adjust clamp with extended saddle cradle ensures precision fit and secure retention. Available in two sizes, 27.2mm x 300mm and 27.2mm x 360mm, each with a 12mm setback. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back.
- 136 grams (27.2mm x 300mm),
- 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm.
- Advanced composite construction delivers light weight and reliability.
- Available in two sizes: 27.2mm x 300mm x 12mm offset, 27.2mm x 380mm x 12mm offset
- No-Fault crash replacement policy. Lifetime warranty
- System Weight Limit: 275lbs / 125kg

$214.99
Such Great Heights
The budget-friendly Aeffect R Dropper Post is a rock-solid, shred-ready entry into the dropper post world. Designed right to keep you on the trails and out of the shop as much as possible, you'll wonder how you ever rode without one.
It's What's Inside That Counts
The brains of this dropper post are an extremely reliable cable-actuated hydraulic cartridge that delivers infinite adjustment within its travel.
Simple Saddle Setup
A user-friendly zero-offset seatpost clamp really cuts down on the time between setting up your saddle and ripping down the trail.

$225.00
This is the first seatpost that’s compliant AND aerodynamic—a total win, win. We initially developed the Pavé seatpost for the all-new Roubaix, and it’ll make a fantastic addition to your Tarmac SL6. Of course, it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options.
- FACT carbon construction paired with a D-shaped seatpost that's compatible with the 2020 Roubaix and Taramc SL6.
- Engineered to have the saddle move in a perfect arc, aka a back & downward motion.
- Setback: 20mm/0mm
- Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt.
- Length: 380mm/450mm
- Approximate Weight: 209g

$250.00
This replacement seatpost for the Tarmac SL8 ensures the perfect fit with two different setback options—0mm and 20mm.
- FACT carbon construction and aerodynamic profile compatible with the 2024 Tarmac SL8.
- Setback: 0/20mm.
- 20mm offset: 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm.
- 0mm offset: Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.

$275.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities.
- Material: Carbon Fiber
- Hardware Material: Titanium
- Saddle Angle Adjustment: 0 – 27 degrees
- Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails
- Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm
- Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar
- Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)

$275.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities.
- Material: Carbon Fiber
- Hardware Material: Titanium
- Saddle Angle Adjustment: 0 – 27 degrees
- Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails
- Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm
- Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar
- Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)

$285.00
- Designed using SRAM Exogram technology
- Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately)
- Matte Black finish

$285.00
- Designed using SRAM Exogram technology
- Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately)
- Matte Black finish
- Seat Post Diameter: 31.6mm
- Seat Post Length: 400mm

$286.00
Salsa's Regulator Ti Seatpost delivers the maximum comfort and performance of titanium, along with the convenience of independent adjustment of saddle angle and fore/aft positioning. This post is built for the long haul with specifically designed, stainless steel bolts, as well as CNC'd aluminum head internals and saddle clamps to provide the ultimate in strength and durability.
- 3/2.5 titanium with a brushed finish
- Length: 410mm
- Proprietary head design allows independent saddle angle and fore/aft positioning
- Small, lightweight head design uses CNC-machined AL-6061 internals with stainless steel threaded stud to prevent thread stripping
- CNC-machined AL-7075 saddle clamps
- Specially designed, stainless steel bolts provide ultimate strength and durability
*NOTE: Not for use with carbon seat rails or ovalized seat rails

$300.00
- Aerodynamic FACT carbon construction that’s compatible with the 2019 Venge
- Sleek Di2 integration hides the Di2 junction box inside
- Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt

$309.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth.
Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper.
- Cable actuated with tool-free quick disconnect for easier installation and removal
- Low lever force provides consistent actuation pressure even with saddle weighted or unweighted
- Easy to modulate return speed with lever
- Remote lever sold separately
- 0mm offset

$309.00
- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop
Specs:
- Seat Post Diameter: 31.6mm
- Travel: 200mm
- Cable Routing: Internal

$309.00
- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop
Specs:
- Seat Post Diameter: 30.9mm
- Travel: 200mm
- Cable Routing: Internal

$309.00
Saddle Up
Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right.
Less is More
New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space.
Full Coverage
Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability.
No-Sweat Installation
Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp.
Brilliantly Uncomplicated
Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version.
- Compatible with Matchmaker
- Includes post only
- Mechanical lever actuation
- Head Type: Zero Offset—2 Bolt
- Weight: 520g
Page 1 of 2
Next page