Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other

$5.00
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts.
- Sold as a pair; two bolts and two springs
- M4x0.7mm thread
- Length: 45mm

$10.00
Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap.
- Includes star nut

$15.00
Snap-on brake cable guides for bikes that don't have any.
- Steel cable housing guide for 1-1/8" top tubes
- Snaps on; no bolts
- Set of 3 clamps

$15.00
Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis?
Well, boy howdy do we have just the thing...

$20.00
This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame.
- Alloy construction
- Replacement derailleur hanger sold separately (Part Number DP0814)
- Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp.
- Laser-etched All-City logo
- Aluminum body with stainless steel hardware

$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included.
- Aluminum hatch cover with stainless screws
- All necessary screws and plates included

$24.99
Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes.

$4.80
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Driver Spacer - Alloy, 10.7, EXP

$4.80
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 15.4mm, for ratchet

$8.20
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Service Kit - 3-Pawl

$13.90
$14.99
7% Off
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 1526 Bearing for Rear Driveside Spline 1200, 2nd Generation Spline1501 and Dicut Disc Wheels

$47.70
Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control.
- Allows for easy installation on Rock Shox Torque Cap compatible forks

$54.50
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Star Ratchet Kit - 24T

$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

$99.60
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
Includes end cap for 12 x 142 and 12 x 148mm hubs
Fits Shimano 12-speed Micro Spline cassettes
Crafted from lightweight aluminum
Compatible with 12mm thru-axles
Page 1 of 25
Next page