Lighting

Grid Front and Rear Lights have four mode options, you can choose if you need high lumen power or extended run time. A complete set ready for those commuting in the city, riding the open roads, or heading to their local trail. The Grid Light Set offers plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C-Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Mountain biking at night can be a magical experience that transforms your familiar trails into an entirely different world. Keep that magic alive by making sure you know exactly how much battery is left, so that you aren't stuck in the dark with a dead light. The Countdown 1600 has an easy-to-read back-lit display that tells you exactly how many minutes of light remain in each of 8 power modes. This light features a super-bright Blitz mode, plus High, Medium, Low, Pulse, and Strobe modes. - Excellent side visibility - No tools required - Lithium-ion battery - 4 hour recharge time - Micro-USB rechargeable - Waterproof to IP-67 standard - Aluminum construction - Off-road handlebar mount - Lumens: Blitz 1600, High 1200, Med 600, Low 300, Pulse 300, Strobe 300 - Runtime: Blitz 1.3 hrs, High 2hrs, Med 4hrs, Low 8hrs, Pulse 12hrs, Strobe 12hrs - Distance: High 131m, Med 98m, Low 69m, Pulse 60m, Strobe 60m 240g / 0.53lb

This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night. You’ll Love – - 5 LED bulbs for higher visibility - 4 light modes (flashing, constant, chasing, and random) - Compatible with any Burley trailer that has a Light Loop or Light Bracket - Includes clip-on light and 2 AA batteries

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

CatEye's Omni 5 Taillight uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.

See and be seen with CatEye's HL-EL135 Headlight. This compact light uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. Plus, the no-tools universal mount makes installation fast and easy.

200 lumen USB rechargeable light with excellent side visibility. A versatile rubber strap allows for quick and easy attachment/removal from the handlebar. - Compact rechargeable headlight (200 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Three light modes (High / Low / Flashing) - Turns on Flashing mode with double-click of power button Run time: - High mode 200 lumens:approx 1.5hrs - Low mode 40 lumens:approx 13hrs - Flashing mode 200 lumens:approx 30hrs

Long running battery-powered rear light with high waterproof rating of IPX7. Built-in "Brake Mode" function will alert others behind you of your deceleration. - Built-in acceleration sensor for Kinetic mode (Brake mode) - Automatically turns on Hi for 2.5 sec when bike deceleration is detected - Waterproof IPX-7: Operates even after 30 minutes of submersion in a depth of 1 meter - Long runtimes - 360 degree visibility - 5 LEDs - 3 modes - Mode memory function - FlexTight SP-11 bracket (Ø12-32mm) - Snap System - Flashing Mode: 160 Hrs - Constant: 70 Hrs - Rapid Mode: 140 Hrs

Compact, bright, and versatile, the ViZ150 stands out with high visibility from OptiCube lens technology and Daytime Hyperflash mode in an economical package. - 3 LEDs (150 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (20 lumens):5 hrs - Flashing (15 lumens):70 hrs - Group Ride (50 lumens):11 hrs - Daytime Hyperflash (150 lumens):15 hrs

AMPP100 The AMPP100 is an eco-friendly rechargeable 100 lumen light. It's lightweight and compact build makes it an ideal choice for all riders. - Compact rechargeable headlight (100 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Two light modes (Constant / Flashing) Run time: - Constant mode 100 lumens:approx 3.5hrs - Flashing mode 100 lumens:approx 35hrs ORB Rechargeable Look no further than the ORB rear light. It's compact, lighweight and neat. With varying flashing modes, the ORB Rechargeable helps you to be seen out on the road. - Lens functions as push-button - USB rechargeable - 3 modes *Charging time: 3.5h - Robust aluminum body - Versatile rubber strap mount Run time: - Rapid flashing :approx 5 hrs - Slow flashing :approx 5 hrs - Constant :approx 2.5 hrs

Safety first, the AMPP500 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. FEATURES: - High power rechargeable headlight (500 lm) - Powerful wide beam with OptiCube lens technology - Excellent side cut outs for enhanced side visibility - Large-capacity lithium-ion rechargeable battery - Battery indicator mode flashes red when less than 20% - Lightweight and compact polycarbonate body - USB rechargeable (Micro USB cable included) - Mode memory function - 4 light modes: High, Low, Daytime HyperConstant, Flashing - Secure FlexTight bracket for quick installation - Water resistant - Optional helmet mount, center fork bracket available Modes/Run time: - High mode: 500 lumens | 1.5hrs - Low mode: 250 lumens | 3.5hrs Dimensions/Weight: - 32 x 102 x 33 mm - Weight: 95 grams (light unit and battery) Light source: - High intensity white LED X1 Optional Parts: - Center Fork Bracket (5342440) - Helmet mount (5341831N) Recharge time: - Approximately 4-4.5hrs (USB2.0 recharge) - About 300 recharge times (until rated capacity drops to 70%)

When you absolutely, positively need to be seen, day or night, rain or shine, trust CatEye's brightest rear safety light. The ViZ450 features 5 LEDs, 300-degree visibility, OptiCube lens technology, and makes sure you stand out with the power of Daytime Hyperflash mode. - 5 LEDs (450 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3.5h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (40 lumens):5 hrs - Flashing (40 lumens):65 hrs - Group Ride (130 lumens):10 hrs - Daytime Hyperflash (450 lumens):14 hrs

The AMPP 1100 uses a compact twin-LED design with OptiCube lens technology spreading a wide and even beam across whatever the terrain throws at you. FEATURES: - High power rechargeable headlight (1100 lm) - Powerful wide beam with OptiCube lens technology - Excellent side cut outs for enhanced side visibility - Compact and robust alloy body with composite battery casing - Large-capacity lithium-ion rechargeable battery - Built-in fast recharging circuit *Full charge in approximately 3 hours (minimum) - 3-level battery indicator (Blue: above 50% | Yellow: 30-50% | Red: Less than 30%) - USB rechargeable (Micro USB cable included) - Mode memory function - 5 light modes: High, Middle, Low, Daytime HyperConstant, Flashing - Double click to turn on High mode - FlexTightbracket - Water resistant - Optional helmet mount MODES/RUN TIME: - High mode: 1100 lumens | 1.5hrs - Middle mode: 800 lumens | 2hrs - Low mode: 400 lumens | 4.5hrs - Daytime HyperConstant mode: 1100/400 lumens | 6.5hrs - Flashing mode: 200 lumens | 50hrs Dimensions/Weight: - 48 x 105 x 34 mm - Weight: 200 grams (light unit and battery) Light source: - High intensity white LED X2 - Battery: li-on rechargeable battery (7.4V-2500mAh) Optional Parts: - Center Fork Bracket (5342440) - Helmet mount (5341831N) Recharge time: - Approximately 3-5hrs (USB2.0 recharge) - About 300 recharge times (until rated capacity drops to 70%)

Seat Post Mount Kit for Varia RCT715

Garmin Varia UT800 Meet the smart headlight that shines brighter for longer - High-intensity cycling headlight for urban and trail use that’s visible in daylight from more than 1 mile (1.6km) away - Projects a steady blast of 800 lumens for up to 1.5 hours - Automatically adjusts to ambient light conditions, speed and ride profile to extend battery life - Works independently or pairs with compatible Edge cycling computers to automatically turn lights on or off, control brightness and more - Offers 5 light modes, including high, medium, low, night flash and day flash Specs: - Dimensions (LxWxH): 3.8" x 1.3" x 1.2" (96.6mm x 33.5mm x 29.7mm); 1.8" with flange (44.7mm with flange) - Weight: 4.6oz (130.0g) - Battery life: 1.5 hours, high; 3.0 hours, medium; 6.0 hours, low; 25.0 hours, day flash; 6.0 hours, night flash - Lumens: 800 - CREE LED: yes - Degrees of visibility: 270 degrees - Visibility distance: 1 mile (1.6km) - Water rating: IPX7

Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation

It sees what you can't. Varia RCT715 rearview radar with camera and tail light continuously records your ride and automatically saves footage before, during and after events if it detects an incident. The bright tail light makes you more visible to motorists. And Varia RCT715 integrates seamlessly with your Garmin bike computer or the Varia mobile app on your paired compatible smartphone to alert you to traffic as you ride. The app allows for live video viewing for camera setup, plus video transfer so you can replay footage postride. A selection of operation modes lets you flex camera and tail light features to maximize battery life for longer rides.

X6 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - AUTO LIGHT SENSOR measures ambient brightness adjusting the light mode automatically - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - Display shows the remaining battery run time - battery symbol in the display starts flashing when battery level is below 20% - 60 LUX - 7 Modes - Run time on Eco = 30 hrs - Run time on High Steady = 3 hrs XBR Rear Light: - ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILITY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option -.20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

- High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs

Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

- Versatile LED and accessories forward mount - Bolts directly to stem faceplate - Included Aluminum Fork Mount, spacer and screw set - Suitable for most Lezyne most E-Bike front lights (Macro, Power, Power Pro, Micro, Hecto)

The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.

Lezyne helmet mount for LED bike lights or GoPro action cameras. Follows line-of-sight for optimized night riding or recording. Constructed from durable, mold-injected Composite Matrix construction. Easy to install Velcro strap fits virtually all helmet styles. Compatible with a large number of Lezyne headlights via the GoPro LED Adapter. - Composite matrix helmet light mount with strap system - GoPro adapter

Lezyne replacement mounts for ebike lights.

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included